DIY Golf Simulator- A Complete Do It Yourself Guide

Every golf enthusiast’s fantasy is to have a golf simulator at home. Today, a golf simulator has become a necessity for golfers to overcome their shortcomings and improve their performance. It has taken its place by improving technology and accuracy.

If you want to set up a DIY, you need to know the materials, which ones to choose, how to set them up, how much money you will need to spend, and other fundamental details. Let’s follow the next segment.


Components You Will Need to Build a DIY Golf Simulator


Launch monitor

A golfer must examine ball and club data to evaluate his shots. It is not always possible to play on a course. A golf simulator might come in handy in this situation. While preparing for a DIY golf simulator, a launch monitor is a must. It is considered the core of the whole setup.

It measures the ball speed, club speed, ball distance, direction, spin rate and other parameters. They are all projected on the screen so that you can assess your own performance. Here, we have introduced the top 3 launch monitors in brief. That will help you decide which one to buy. 

SkyTrak– Best indoor launch monitor 



High-speed images are taken by this photometric launch monitor to collect the data. Ball speed, launch angle, side spin, back spin, and side angles can all be directly measured. It determines the other parameters, such as distance, spin rate, flight path, etc. using these data and the images.

It is so handy and simple to set up. You can adjust the weather to match your location so that the temperature or humidity doesn’t affect the shots. SkyTrak is compatible with any golf simulation software, enabling it to provide a wide range of features. The only drawback is that this simulator collects fewer club data, so the premium experience may be compromised. But this won’t bother your performance. 

FlightScope Mevo – Best portable launch monitor 



It is a rudder-based golf simulator launch monitor. Using 3D Doppler Effect, this lightweight and portable device measures 16 parameters including carry distance, club head speed, smash factor, ball flight, flight time, speed, spin rate, launch angles, total distance, and many more.

At home, you will need at least 16 feet long space to ensure a proper setup. Mevo Plus can collect real-time data both inside and outside. This device requires a basic simulation software setting. 

Foresight Sports GC3– Best for premium experience 



Absolute accuracy, advanced technology and outstanding performance have made this launch monitor the first choice for many professionals. This photometric device uses triscopic technology to measure club and ball data from different angles. So that top-notch accuracy is guaranteed and you won’t miss a thing. 

Also, this device can use real-time data to adjust temperature,  humidity and altitude. You can place it inside or outside. The premium outlook and performance of this GC3 can beat the others available in the market. It includes FSX 2020 and FSX Play simulator software to offer a world-class experience.


Impact screen and net



To set up a DIY golf simulator, golfers need to set up an impact screen that can keep the ball from being lost. It consists of sidewalls and a top shed. It projects the distances, speeds, spins and other parameters.

There are some specifications to check for before choosing the right one. Set a bright and vivid screen. Then see if it can sufficiently absorb the impact shock. If you want to prevent wear and tear on your wall, think about durability. Spacing is yet another crucial aspect. It depends on the projector you have been using. In a DIY golf simulator setup, you can choose your own.

You do not need to purchase the screen if you are not using a projector. If so, pick up a golf net. Purchase at least 8 feet by 8 feet of net to fit comfortably in your room. Connect the software to your TV or laptop with an HDMI cable to see the outcome after impact.                    


Projector 



A projector is a must while using a golf simulator impact screen. It offers a professional-quality gaming experience. To accommodate a limited space, you should buy a small-throw projector. Short-throw ratios projecting 1:1, 4: 3 or 16: 9 are more compatible in any golf room. 1080p HD resolution will project a highly contrasted and clear view.

However a projector with a 4K or HD screen gives the best experience. If you are playing in a comparatively darker room, pick a projector built to offer higher lumens. The Optoma GT1080HDR Short Throw Gaming Projector may meet your requirements. You can place it only 4 feet away.

Though it’s recommended you place the projector a minimum of 7–8 feet away from the screen so that the ball cannot hit it while bouncing back. HDMI connections make the projector more compatible. 


Computer

A computer plays an essential role in building a DIY golf simulator. The computer serves as the central processing unit for all the components of the device, such as cameras, projectors, sensors and monitors. It controls how all these components interact with each other so that data collected by them can be accurately analyzed. 

Additionally, it helps in simulating various conditions like wind speed and direction which affect ball trajectories in order to make results more realistic. Furthermore, software programs can be used on the computer to provide real-time feedback about performances during practice sessions with detailed information about strokes taken and distances achieved.

Make sure that your chosen computer is powerful enough to handle running the most popular and advanced golf simulation software such as TruGolf E6 Connect. Also you should ensure that it has enough space for storing multiple courses and games without lagging or crashing.


Software

Most golf simulators come with a built-in software system. However, there are a lot of software options available. All software can measure fundamental parameters including speed, distance, direction, spin rate and others. You must upgrade your software in order to take advantage of some advanced features and modes.

Advanced software will allow you to enjoy an expert-level golf experience. Some software is compatible with different simulators. So you don’t need a specific one. Here are some highly-rated golf simulators with top-notch graphics:


Hitting mat 

If you don’t want to damage your floor as well as the club head, place a golf mat before the screen. It will allow a soft swing without any obstacles. A hitting mat gives you authentic golf course experience in addition to protecting your club head.  Durability, portability and material should be checked before buying a golf mat.


How to Build a Golf Simulator 


Step 1: Determine where to set your golf simulator 

First, decide the place where you want to set this whole thing up. Maximum golfers prefer a course in their garage, basement or outside. However, remember that to set up the golf simulator, and again you will need a minimum space of 12″ by 12″ by 10″.

Otherwise, your swings may get interrupted and you may cause damage to the walls or cameras. Make sure there is enough space for a projector to be set at least 4 feet away from the screen in order to get a full-length visual. 


Step 2: Ensure the spacing requirement

When aiming the screen, adequate spacing is crucial. Setting up a golf simulator will be difficult if there isn’t enough room, and you can’t take a full swing there. One of the most frequently asked questions before purchasing a simulator is how much space I’ll need. Here is further information about practical dimension measuring.

Room length 

You will need a minimum of 12 feet of golf room in length. You require this length for placing the hitting mat, impact screen and golf net, projector and cameras. The longer the room is, the ball will travel farther before striking the screen. 16–18 feet of room length will offer you a flexible throwing experience. 

A minimum one-foot gap is suggested between the impact screen and the wall. Otherwise, while the ball hits the screen, it sags slightly, which may damage the wall.

If you want to practice using a golf net without setting the screen, a length of 10 feet is enough.

Room width 

A room at least 10 feet wide is required. A wider room is necessary if you typically play with a longer swing. Otherwise, you may hit the projector. If you set up a screen along with a golf net, you need to have a free space next to the screen. 

A narrow space can impact your aim. If you place the simulator as a right-handed player, you need to swap it for your left-handed opponent. But because there isn’t much room, it will impact the targeting. Place the simulator in a wider room that is 12 to 16 feet wide to avoid this situation. 

Room height 

To avoid hitting your ceiling with your club swing, a minimum height is required. For a relaxed swing, at least 8.5 feet in height is needed. However, a minimum golf room height of 10 feet is advised for taller people.

If the ceiling is not high enough, you may end up with the club hitting it. You should keep room for the side swing, back swing and upper swing to avoid any damage. Change the club length if there is no choice. 

You can use a smaller simulator, but if you want to experience the premium game, try placing it in a room that is 12 feet by 12 feet by 10 feet in size.


Step 3: Buy a launch monitor 

Choosing a quality golf simulator launch monitor can change your gaming experience. It works using high-speed cameras or biometric sensors. Launch monitors measure ball and club data to calculate some fundamental metrics and project ball speed, club head speed, the total path the ball travels, spin rate, launch angles etc.

Sensitivity plays a vital role in it. If you waste your money on cheap devices, they may result in inaccurate data measurement. Ultimately, the purpose of improving your performance will be in vain.


Step 4: Install a golf simulator software 

There are several golf simulator software that require no subscription. You can travel unlimited courses around the world. But to enjoy it to the fullest, get technologically advanced software that can project advanced data and high-quality visuals. A competitive atmosphere will be created in multiplayer mode. So you can challenge yourself to improve. A top-notch software to be checked out is E6 Connect


Step 5: Place the golf mat, the impact screen or a golf net

Put the golf mat before the impact screen to cover the maximum area. A larger mat will cover the swing area as well as the landing area. So your floor will escape from repeated dabbing. 

Impact screens are two or three-layered, thick curtains against which you hit the ball. Side walls adjacent to it also preserve the ball from being missed. The screen should be a minimum of 8 feet by 8 feet. A smaller screen may not provide the entire course view. But it is better than nothing. Wrap the screen’s side straps around the poles and place it at least one foot away from the wall. 

If you are setting up the golf simulator only to practice so that you can overcome your shortcomings, get a golf net instead of an impact screen. Connect your simulator to your iPad or laptop. You will see the calculated parameters after every swing. The ball will hit the net and return to you. 


Step 6: Ask yourself if you need a projector

A projector is optional. If you are on a budget, you can skip the projector. A projector projects the parameter onto a clear, bright screen. There are different projectors that can be operated by almost all of the simulators. Place the projector behind your simulator. 


Step 7: Choose the course, and gaming mode to get started

Select a pre-installed course and playing mode. Then fix the ball. Swing your club swiftly. Once it pushes the impact screen, it bounces back. The screen projects all the metrics. Practice constantly to get better at golf.  


FAQS of DIY Golf Simulator


How Much Does It Cost to Build a DIY Golf Simulator?


The average cost starts at $3,000 and can reach five figures. Actually, it depends on your preference. If you pick an entry-level launch monitor, a golf net instead of an impact screen, along with a mid-budget golf mat, your cost will get reduced. You can even build your own DIY golf simulator for less than $1000. But within this budget, you won’t manage the projector and screen.


You May Also Like: How Does A Golf Simulator Work


Conclusion 


Multiple options for choosing equipment to build a DIY golf simulator may make you confused. But we hope this article has made it clear that you have so many options to make your own golf simulator, choosing from different budgets, compatibility, features and durability.

We have explained briefly all the elements you need to build a DIY golf simulator and how to use them at home. Now get them together and start to enjoy your pastime.  

James Krig is a skilled content writer at Nattygolf, known for his engaging storytelling and passion for golf. With ten years of experience, James offers insightful articles that captivate and educate readers. As a dedicated golfer, he brings authenticity and expertise to his writing, making him a valuable asset to the Nattygolf team and the golf community.

Leave a Comment